Solid Surface Care and Cleaning
Although liquids cannot penetrate solid surface such Corian®, Staron, HI-MACS, Livingstone and Stonia, it is best to wipe up spills as they occur. Generally, a damp microfiber cloth used with a standard household kitchen spray should remove most stains.
For most residues, all you need to clean your solid surface countertops is warm soapy water, ammonia-based household cleaner, or a dedicated countertop cleaner. Do avoid window cleaners, however, as they can leave a waxy build-up that dulls the surface. Always clean using a circular motion.
Film will build up on countertops if water is left to dry on the surface. This film will dull the countertop surface, making the finish appear blotchy and uneven. To prevent film build-up, it is very important to wipe the countertop completely dry immediately after spills and cleaning.
Some colors of solid surface may require more frequent cleaning to maintain a uniform finish. Darker colors tend to require more attention than lighter colors. Over time, even with proper care, your countertop will acquire a sheen. Dark colors may show light scratches more readily.
Once or twice a week, give your sink a beauty treatment : Remove all the fat and oil residues of normal food preparation from the sink, using a detergent or a hard-surface cleaner. Use a spray with 3/4 of liquid household bleach and 1/4 water to spray the sink and leave a few hours or overnight. The exposure time should be limited to 16hrs. In the morning, rinse or clean with a damp cloth. The sink should then be beautifully clean, with very little effort.
Dealing with Resistant Stains
Common household spills
, such as vinegar, coffee, tea, lemon juice, dyes, ketchup, red wine or vegetable spills can be cleaned with Soft Scrub®
, Simple Green®
, Bar Keepers Friend Foam Spray®
or equivalent cleaner.
can be a problem in many areas, and can build up over time. If you live in a hard water area, and are experiencing problems with stain removal, apply “Viakal®
” gel over the area, leave for 2-4 minutes, then remove with a damp microfiber cloth. Using a second clean microfiber cloth, rinse the area thoroughly with water. Use a damp microfiber cloth and a mild abrasive cleaning product.
In most cases, solid surface
s can be repaired if damaged. Be sure to follow these guidelines to help you prevent any permanent damage to your solid surface
While solid surface
is heat resistant, as with all countertop materials, it is important to minimize direct heat exposure to protect your surface and investment.
Important — Do not place hot pots, pans, etc. directly on the countertop surface.
Always use heat trivets or pads when placing hot objects on any surface. Always use a trivet under portable heat-generating appliances, such as a toaster oven. Allow cookware to cool before placing it into a soild surface® sink.
- Heat marks & scorching
Always use a heat protection pad, trivet (with rubber feet) or protective sink mat for hot cookware, or leave cookware to cool first. Never put hot pans, particularly cast iron, directly on a solid surface top or in a sink. Such heat can damage any surface. Boiling water alone will not damage your solid surface sink. However, it is a recommended practice to run cold water from the faucet while pouring boiling water into the sink. Always use the correct size pan on the burner and place it centrally. An overhanging pan scorches surrounding surfaces.
Like all materials, solid surface will develop slight abrasion marks in normal daily use. Never cut or chop on solid surface, it will score the surface. Use a chopping board instead.
Dark, heavily pigmented colors will show scratches, dust and ordinary wear and tear more readily than lighter, textured colors.
- Chemical Spillage
Accidental spills of strong chemicals (e.g. paint stripper, brush cleaners, metal cleaners, oven cleaners, cleaners containing methylene chloride, acid drain cleaners, acetone based nail varnish removers etc.) should be flushed promptly with plenty of soapy water to avoid damaging the countertop ! For nail varnish spills, non-acetone based remover can be used, and then flushed with water. Undetected or prolonged exposure to chemicals may damage the surface.
- Instant Boiling Water Taps
A container should be used to collect boiling water at all times as boiling water from this type of tap may cause surface damage in and around the ®Corian sink. This type of damage is not covered by the DuPont 10 Year Warranty.